#CISCO USB CONSOLE DRIVERS WINDOWS 10 INSTALL#

See Installing the Cisco Microsoft Windows XP, 2000, Vista, 7, 8, and 10 USB Device Driver for more information.Дў.

#CISCO USB CONSOLE DRIVERS WINDOWS 10 INSTALL#

If you are connecting the switch USB-mini console port to a Windows-based PC for the first time, install a USB driver. Follow the steps in the Completing the Setup Program.ДЎ. The PC or terminal displays the bootloader sequence. Connect power to the switch as described in Connecting to Power.ДҐ. Configure the baud rate and character format of the PC or terminal to match the console port characteristics:Д¤. The program, frequently a PC application such as HyperTerminal or ProcommPlus, makes communication between the switch and your PC or terminal possible.ДЈ. Start the terminal-emulation program on the PC or the terminal. Connect the other end of the cable to the switch console port.Дў. Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. Remove the screw and take off the cover.ДЇigure 21 USB Mini-Type B Console Port CoverДЎ. Use a Phillips screwdriver to loosen the captive screw on the USB mini-type B console port cover. To remove the cover from the USB mini-type B console port:ДЎ. в– USB Mini-Type B Console Port Removing the USB Mini-Type B Console Port Cover Use one of these options to access the CLI: You can enter Cisco IOS commands and parameters through the CLI. This appendix provides a command-line interface (CLI)-based setup procedure for a switch.Д«efore connecting the switch to a power source, review the safety warnings in WarningsДЇor installation procedures, see Switch Installation Accessing the CL I Through the Console Port Configuring the Switch with the CLI-Based Setup Program

Cisco usb console drivers windows 10